Slidekamera By MRMC Accessories | Mark Roberts Motion Control

ATLAS Rail 0.8m / 80cm Rail section

ATLAS 1.2m / 120cm Rail section

ATLAS 2m / 200cm Rail section

ATLAS 3m / 300cm Rail section

ATLAS MODULAR DOLLY is equipped with 12 wheels, made of a specialy chosen rubber. The positioning of the wheels allows the cart to freely move, no matter the slider position - horizontal, vertical, diagonal or even upside down.

24 custom designed wheels for extreme stability. Perfect motion at any angle: horizontal, vertical or upside down

SET INCLUDES ATLAS MODULAR side brackets (2pc set)

ATLAS Rail Bracket with Pneumatic Bumpers (2pc set)

Used for smaller payloads and lower speeds. Controller and power supply not included and will need to be added.

Servo motor for heavier payloads and faster speeds. Controller and power supply not included and will need to be added.

ATLAS MODULARATLAS MODULAR travel transport case for 1.2m slider rail. ATLAS MODULAR travel transport case for 1.2m slider rail. ATLAS MODULAR travel transport case for 2x2m long sections + Cable guide (Case Weight: 25kg).

The set consist of 75/100mm self leveling disc for tripods and 3/8" universal mount. It's used to mount ATLAS MODULAR slider to the tripod. The disc is permanently attached to the slider's feet by hex screws. It allows the slider to be placed quickly on the tripod's bowl and firmly secured with the 3/8" universal mount.

75/100mm self-leveling disc helps to mount the ATLAS MODULAR slider on the tripod with 75/100mm bowl. It's permanently attached to the slider's feet by hex screws. It allows the slider to be placed quickly on the tripod's bowl and firmly secured with the 3/8" universal mount.

TITAN SLIDER 1000mm / 39.3in. TITAN SLIDER 1500mm / 59.1in.

TITAN STEPPER DRIVE. Motor to turn TITAN Slider from manual to powered

TITAN SERVO DRIVE. (need to add controller and PSU)

Transport case for TITAN 1000 Slider. Transport case for TITAN 1500 Slider.

Simple intuitive controller for Slidekamera control.

Intuitive 2 axis controller for pan tilt heads with joystick ideal for jib solutions.

6-axis controller, for a standard setup (slider + remote head + lens motors) or custom configurations. Includes: x1 KAIROS Controller, x1 3m mini-LEMO Control Cable, x1 3m RJ-45 network cable, x1 USB-C Cable, x1 Wi-Fi antenna, x1 Transport Hard Case for KAIROS Controller.

Foot controllers to pair with the KAIROS Controller for using multiple axis simultaneously. Includes: x1 Foot Controller (pair), x2 Connection Cables.

Power Supply Unit for single device - slider drive or remote head. Suitable fordevices up to 185W.

Power Supply Unit for a set of devices: slider, remote head, lens drives, etc. Suitable for setups up to 320W. Integrated network adapter - for advanced configuration, studio setups, Wi-Fi, Slideye 2.0 and Dragonframe software.

The D-TAP power cable comes in two flavours: with standard, DC plug (5.5mm/2.5mm), or mini-XLR plug.

DUAL SUPPORT is a solution designed to increase the stability of longer sliders by adding support on a tripod. Recommended for working with heavier camera sets horizontally, vertically and at any desirable angle.

Designed for smooth and stable moves of the camera on tripod during shooting. Used with GIANT TRIPOD and Heavy GIANT TRIPOD as well as other tripods.

Slidekamera AF-24 adapter for mounting photo-video accessories on Giant tripods

PSK bag for Infinity tripod and Giant 700 tripod. PSK bag for Infinity tripod and Giant 920 tripod.

PTZ Quick Release Adapter - 1/4" or 3/8" mounting. Can also be used with all Slidekamera heads using the native 3x M6 mount.

Adapter mount to attach a DJI RONIN Gimbal system to sliders. Best used with Kairos controller for controlled movements. Includes x1 RONIN Adapter, x1 S-BUS Cable for connecting the gimbal, x1 LEMO Cable (L1M6F).

Universal set for mounting Slidekamera devices on any Mitchell base. Works with Slidekamera remote head and other devices equipped with compatible mounting please (e.g. TURNTABLE) Includes: x1 Threaded Collar, x1 Castle Nut, x6 M6 Screws for threaded collar.

Slidekamera 3/8" universal mount that facilitates quick mounting of camera cranes, sliders and other devices on tripods equipped with sockets that fit half balls up to 150mm

Includes: x1 Euro Mount Female adapter, x3 M6x20 Screws.

Includes: x1 Euro Mount Male adapter, x3 M8x50 Screws.

Includes: x1 Euro Mount Male adapter, x1 Euro Mount Female adapter, x3 M8x50 screws, x3 M6x20 Screws.

V-Mount adapter for mount

SET INCLUDES: Powder painted aluminum plate / wedge, Camera Mounting Screw 1/4", Camera Mounting Screw 3/8", 3 pcs. M3x16 screws, 2mm Allen key L type

SET INCLUDES: Anodized aluminum socket, Knob extender M6, 2 pcs. Camera Mounting Screws 1/4", 2 pcs. Camera Mounting Screws 3/8", 2 pcs. M4x12 screws, 2 pcs. M4x20 screws, Powder painted aluminum plate / wedge, 3 pcs. M3x16 screws, 3mm Allen key L type, 2mm Allen key L type.

Set includes: Slidekamera Angle adapter 1/4" and 3/8" photographic screws and a grub screw that locks them four M4x12 screws 3mm Allen key L type

Angle support mounting plate 1/4 " and 3/8".

20cm camera riser plate with Mitchell mount.

AF-15 High Hat Bowl Riser for 75mm/100mm/150mm Bowl allows you to mount photo-video heads with 75mm/100mm/150mm half ball.

With the universal Bowl Riser, you can attach your favourite fluid head to the industry standard EURO mount.

Set includes: HCZ-75mm Bowl Adapter with three M4 threaded holes, three M4x20mm Allen screws Material: black hard anodized aluminum

Set includes: HCZ-100mm Bowl Adapter with three M4 threaded holes,three M4x20mm Allen screws Material: black hard anodized aluminum

Set includes: HCZ-150mm Bowl Adapter with three M4 threaded holes,three M4x20mm Allen screws Material: black hard anodized aluminum

Set includes: HCZ-75/100mm socket with three M4 threaded holes, screw-in reducing insert that reduces the socket to 75mm, three M4x20mm Allen screws Material: black hard anodized aluminum

Universal Baseplate that allows you to mount the follow focus/lens control motors or matte box on most brands of medium cameras.

Quick release system- short (DV) camera plate

The sliding plate is equipped with four M4 holes (Manfrotto spacing), two countersunk holes for M8 screws and two 1/4" and 3/8" photographic screws.

AK-101 LONG sliding plate dedicated to Slidekamera devices and AKC-3 adapter connects and disconnects the devices so that the user does not have to focus on time-consuming assembling and disassembling of equipment.

Slidekamera AF-8 SH 3/8" and 1/4" thin mounting plate for X-slider.

75mm half ball with 3/8" screw with short locking handle.

100mm half ball with 3/8" screw with short locking handle.

150mm half ball with 3/8" screw with short locking handle.

SHORT Locking Handle for Half Balls 75/100mm 3/8".

VARIO Ball 3/8" allows to attach VARIO ARM - Classic and additional photo-video accessories to a standard 3/8" hole.

VARIO Connecting clamp connects two arms or adapters that end with 25mm diameter ball. It also allows to extend VARIO ARM

VARIO Hot shoe adapter allows you mount VARIO ARM and additional photo-video accessories to hot shoe port of any camera/photo camera

VARIO Articulated long arm 4,7" Adapter comes with two attachments, small 1/4" gummed base that can be extended with a reducing spacer with 1/4" threaded hole, and 25mm diameter ball.

VARIO Long extension arm 10,6" allows you to connect AKC-3 quick release system adapter that secures camera/photo camera

VARIO Mini extension arm 3,5" Works perfectly as arm extension for VARIO ARM as well as a handgrip or a handle in DSLR set

VARIO Reducing spacer. Reducing spacer with 1/4" threaded hole for VARIO ARM.

VARIO Rod clamp 15mm allows you to attach VARIO ARM or VARIO SYSTEM extension as well as other additional photo-video accessories to a standard 15mm rod

VARIO Triple connecting clamp - Allows to mount various kinds of photo/video accessories (lightning, on-camera field monitor, sound recorder, etc.) to sliders, camera cranes, tripods equipped with 1/4” thread or hole.

VARIO Articulated short arm 2,4" Adapter comes with two attachments, small 1/4" gummed base that can be extended with a reducing spacer with 1/4" threaded hole, and 25mm diameter ball

VARIO Short extension arm 6,3". Works perfectly as arm extension for VARIO ARM as well as a handgrip or a handle in DSLR set

VARIO Plate 10.6" is the basic plate of the VARIO system , which allows you to mount digital cameras or digital cameras with 1/4" or 3/8" photographic screws.

Two Sets Available: VARIO ARM - Classic 8" and Classic 11". Allows to mount various kinds of photo/video accessories (lightning, on-camera field monitor, sound recorder, etc.) to sliders, camera cranes, tripods equipped with 1/4” thread or hole.

Two Sets Available. VARIO Extended 18" and Extended 27". Allows to mount various kinds of photo/video accessories (lightning, on-camera field monitor, sound recorder, etc.) to sliders, camera cranes, tripods equipped with 1/4” thread or hole.

VARIO Micro 4" - Allows to mount various kinds of photo/video accessories (lightning, on-camera field monitor, sound recorder, etc.) to sliders, camera cranes, tripods equipped with 1/4” thread or hole.

Comes in three sets: VARIO ARM - Standard 8", Standard 11" and Standard 15". Allows to mount various kinds of photo/video accessories (lightning, on-camera field monitor, sound recorder, etc.) to sliders, camera cranes, tripods equipped with 1/4” thread or hole.

Allows to mount various kinds of photo/video accessories (lightning, on-camera field monitor, sound recorder, etc.) to sliders, camera cranes, tripods equipped with 1/4” thread or hole. Two Set Available: VARIO - High Hat SET Slidekamera VARIO - High Hat SET – extended

VARIO Camera Set - Allows to mount various kinds of photo/video accessories (lightning, on-camera field monitor, sound recorder, etc.) to sliders, camera cranes, tripods equipped with 1/4” thread or hole.

VARIO Grip Set - Allows to mount various kinds of photo/video accessories (lightning, on-camera field monitor, sound recorder, etc.) to sliders, camera cranes, tripods equipped with 1/4” thread or hole.

Slidekamera by MRMC

Accessories & Parts

ATLAS SLIDER Rail 0.8m

ATLAS SLIDER Rail 1.2m

ATLAS SLIDER Rail 2m

ATLAS SLIDER Rail 3m

ATLAS SLIDER DOLLY MK2

ATLAS SLIDER EXTENDED DOLLY

ATLAS SLIDER Brackets

ATLAS SLIDER Bracket with Pneumatic Bumpers

ATLAS SLIDER Stepper Motor

ATLAS SLIDER Servo Motor

ATLAS SLIDER Case

75/100mm quick mount set for ATLAS SLIDER

Adapter 75/100mm self-leveling disc for ATLAS SLIDER

TITAN SLIDER Rail - 1 & 1.5 metres

TITAN SLIDER Stepper Drive

TITAN SLIDER Servo Drive

TITAN SLIDER Case - 2 Options Available

AION IQ Controller

AION 2D Controller

KAIROS Controller

Foot Controllers

Power Supply Unit 185W

Power Supply Unit 320W with Slidelink 3.0

D-TAP power cable (0,6M)

DUAL SUPPORT for Sliders

Tripod Dolly

AF-24 Adapter for Mounting Photo-Video Accessories on Giant tripods

Bag for Giant Tripod - 2 Sizes Available

PTZ Quick Release System Adapter

RONIN Adapter

Mitchell Mount

3/8" Universal Mount

EURO MOUNT Adapter (female)

EURO MOUNT Adapter (male)

EURO MOUNT Set (Male & Female)

V-Mount Adapter

V-Mount Plate

V-Mount Adapter & Plate Set

Angle Adapter

Angle Support Mounting Plate 1/4 " and 3/8"

AF-47 Cinema Riser

High Hat Bowl Riser (75/100/150mm Bowl)

Bowl Riser - Euro Mount (75/100/150mm)

75mm Bowl Adapter

100mm Bowl Adapter

150mm Bowl Adapter

75/100mm Bowl Adapter

SHOOTO RIG - Universal Baseplate

AKC-3 Quick Release System

AK-101 Sliding Plate for AKC-3 Adapter

AK-101 LG Sliding Plate for AKC-3 Adapter

AF-8 SH 3/8" and 1/4" Thin Mounting Plate for X-slider

75mm Half Ball with 3/8" Screw

100mm Half Ball with 3/8" Screw

150mm Half Ball with 3/8" Screw

SHORT Locking Handle for Half Balls

VARIO Ball 3/8"

VARIO Connecting Clamp

VARIO Hot Shoe Mount

VARIO Articulated Long Arm 4,7"

VARIO - Long extension arm 10,6"

VARIO - Mini extension arm 3,5"

VARIO Reducing spacer

VARIO Rod clamp 15mm

VARIO Triple connecting clamp

VARIO Articulated short arm 2,4"

VARIO - Short extension arm 6,3"

VARIO Plate 10,6"

VARIO ARM - Classic Sets

VARIO ARM - Extended Set

VARIO ARM - Micro 4"

VARIO ARM - Standard Sets

VARIO - High Hat SET

VARIO - Camera SET

VARIO - Grip SET

No accessories found

Contact Us