Full List of Accessories | Mark Roberts Motion Control

Bolt breakout cable 48V Bolt arm to high-speed track base or pedestal

Classic camera "cage" for the range of high-speed Bolt camera rigs.

Bolt arm head breakout cable 48V and Ethernet for Ulti box mounted on the arm.

Camera platform for Bolt range with side, end, and top-mounting options for 14" and 19" matte bars. It has a quick-release system for effortless switching between camera plates, which can be removed for extra stability.

A filter to reduce noise on datalink - for datalink rigs such as Milo, Talos, Modula, etc.

Datum and Limit 3 Way Lemo Cable (59cm).

Alternate Guinness Head base plate allowing for underslung mount of the camera

Pan bars provide Mimic input to Flair via ethernet.

Handheld box – Hand controller with serial connection to RT-14 for Bolt family of robots.

Handheld box – Hand controller with a serial connection to RT-14 for Modula, Milo and Talos.

Axis controller is used to drive up to 4 (part no. MRMC-1120-01) or 8 (part no. MRMC-1138-01) stepper motors and connects via Ethernet or datalink connection to a Flair computer or an MSA-21 controller.

Includes a depth sensor camera and box which can measure target distances in real time using a camera mounted on an MRMC rig and accordingly instructing Flair 7 to adjust the Focus axis.

Small high-speed turntable with 20kg payload and capable of 400 deg/s – requires spare Ulti (not included).

Used to start/stop a move or camera like any other input to Flair. It can be connected directly to the Trigger box in any of the input channels.

Large turntable with 650kg payload. Ethernet capable and can also run from a Milo driver box.

Large track pinion with 55 teeth for Milo.

Bloop Light flashes brightly to mark frames for quick angle matching in multi-camera shoots. It connects via a 37-way D-type to the Triggers connector in RT-14.

Large Servo Lens control motor

Cable to connect the large servo lens control motor to the Ultibox.

Extension cable for the large servo lens control motor.

Where the Focus geared ring on the lens shifts back and forth more than is available on a standard gear.

Small turntable with 20kg payload. Stepper motor and ethernet capable

Medium turntable with 200kg payload. Stepper motor and ethernet capable.

Upgrade kit to run the Medium Turntable with a Simple Stepper Motor controller.

Upgraded steering system for the Milo – must be used with standard Milo wheels, cannot be used with the castor wheel system.

Castor wheel set for the Milo – similar to the Bolt, this obviates the need for ramp ups if space is at a premium

Milo outer arm pinion for angle.

Milo Pinion 32T MOD 1.25 size 25 TPM+ 64:1 for outer arm

Milo rotate pinion 50 teeth.

Milo rotate pinion Alpha.

Milo Rotate pinion for long arm Milo.

Pinch wheel upgrade for older Milos with the Gerard gearbox.

Interface box to provide up to 4 mimic inputs to a root box.

Cable assembly from Mimic Controller to Mimic Breakout.

Hand wheels for mimic input to Flair.

A kit of model mover attachments for (RX160/TX90) arm – cheese plate, small keyless chuck, large 3-jaw chuck.

A kit of model mover attachments for Jnr+ arm – cheese plate, small keyless chuck, large 3-jaw chuck.

Pinch wheel for Bolt on Track, Modula and Milo.

Handwheels to control the head via Mark Roberts Standalone (MSA) datalink.

PC System with Flair, intime and Blackmagic SDI card without NetX card for use with Bolt Jr+ and Bolt X.

PC System with Flair, intime and Blackmagic SDI card without NetX card for use with Bolt.

Pivot pin for pinch wheel assembly.

Supplies power to the Ulti box, from the arm 48V XLR socket.

Large Desktop PSU with 2 XLR connectors for 48V at 10A.

Small 48v Power supply 5A – black brick type.

Narrow Precision Rail – 1.2m

Narrow Precision Rail – 1.8m.

Narrow Precision Rail – 3m

Standard Precision Rail – 1.2m.

Standard Precision Rail – 1.8m.

Standard Precision Rail – 3m

Channelless Rack Support and Clamp for Precision Rail and Narrow Precision Rail.

Rail Datum Limit holder assembly.

300mm riser for the new narrower Bolt Jnr+ Track base.

Stepper Roll axis can be added (to replace the support arm) which allows the camera to toggle between landscape and portrait mode.

Also, known as FIZ pot, moves the axis when rotary controller is turned. Usually used with controllers such as Pan Bars, Handwheels, MSA-21 joystick controllers.

Root box, or interface box, to handle communications between Flair and the robot and input and output devices.

Simple Stepper Motor Controller can be used to drive a stepper motor including that on MRMC’s Medium Turntable. Simple application by turning a knob when only forward movement is required. Does not require a software.

Size 17B Stepper motor, wired for Quad/Octo 1m lead

Size 23B Stepper motor, wired for Quad/Octo 1m lead

Axis controller used to drive upto to 8 stepper motors and connects via Ethernet or datalink connection to a Flair computer or an MSA-21 controller

Rail joiner for Precision and Narrow Precision Rail.

Ulti Trigger cable for use with cameras using LANC protocol such as Sony, Blackmagic, etc

Ulti trigger cable for DSLR cameras such as Nikon, etc.

A special breakout cable to connect up to 3 Stepper motors to the Ultibox

Controllers & Accessories

Accessories & Parts

Bolt base breakout cable 48V & Ethernet

Bolt Classic Camera Cage

Bolt head breakout cable 48V & Ethernet

Combination Camera Platform for Bolt Range

Datalink Isolator

Datum Lemo cable (3-way)

Dual Camera mount for Guinness

Ethernet Pan bar System

Serial HHB for Bolt Range

Serial HHB for Milo, Talos, Modula

Ethernet Stepper interface box (4 or 8 ports)

Focus Assist Module

High Speed Turntable, 20kg payload, 400 deg/s

IR Beam for use with trigger box

Large Servo Turntable (650kg payload)

Large Track Pinion for Milo

Laser Bloop Light

Lens Control Motor & Gear Set (high speed/torque)

Lens Motor cable

Lens Motor extension cable 8m

Long focus wheel(20, 40, 100mm)

Small Turntable (Stepper, 20kg payload)

Medium Turntable (Stepper, 200kg payload, ethernet)

Medium Turntable upgrade kit for Simple Stepper Controller

Milo Cam Lock Steering system

Milo Castor wheel assembly set

Milo Outer Arm pinion (Angle)

Milo Outer Arm pinion (Angle)

Milo Rotate pinion

Milo Rotate pinion - Alpha

Milo Rotate pinion (Long Arm)

Milo/Titan Pinch wheel upgrade (old Gerard gearbox)

Mimic 4w interface box

Mimic curly cable

Mimic Hand wheels

Model mover chuck kit Bolt/Bolt Jnr arm (RX160/TX90)

Model mover chuck kit for Jnr+ arm (RV-13)

Modified High Speed Pinch Wheel

MSA-21 Hand wheels

PC System with Flair, intime and Blackmagic SDI card

PC System with Flair, intime and Blackmagic SDI card + NetX card

Pivot pin for pinch wheel assembly

Power patch cable for Ulti 48V XLR

Power Supply 48v PSU 10A

Power supply XLR 48v 5A

Precision Rail, narrow width, 1.2m

Precision Rail, narrow width, 1.8m

Precision Rail, narrow width, 3m

Precision Rail, standard width, 1.2m

Precision Rail, standard width, 1.8m

Precision Rail, standard width, 3m

Racking clamps

Rail Datum Limit holder assembly

Riser for Bolt Jnr+ Track base (narrow) 300mm

Roll Axis upgrade for SFH-50

Rotary Focus Pot

RT-14

Simple Stepper Motor Controller

Size 17 Stepper motor, wired for Quad/Octo 1m lead

Size 23 Stepper motor, wired for Quad/Octo 1m lead

Stepper Motor interface box (Octo, 8 ports) - Ethernet

THK Rail Joiner 220mm

Trigger cable for cameras with LANC (Ulti)

Trigger cable for DSLR cameras (Ulti)

Universal Sync kit (Ulti)

Ultibox Stepper breakout cable

No accessories found

Contact Us

Datum Lemo cable
(3-way)

Ethernet Stepper interface box
(4 or 8 ports)

Long focus wheel
(20, 40, 100mm)

Model mover chuck kit
Bolt/Bolt Jnr arm (RX160/TX90)