|
MRMC Newsletter
20th May 2005

This Week:
•The Life Aquatic For Milo
•Ulti-Head Package Pricing from £34,900
•IBC2005 Already? |
 |
| |
| The Life Aquatic For Milo
A recent Disney Picture starring Bill Murray and Cate Blanchett featured
several shots created with a couple of Milo motion control systems,
supplied and operated by Motion Control Cameras, UK. The Life Aquatic is
Wes Anderson's (The Royal Tannenbaums, Rushmore) latest creation.
The film which was shot in Italy in the Mediterranean, features Steve
Zissou (Bill Murray) as an internationally acclaimed oceanographer who
sets sail on an expedition to track down the elusive and possibly
non-existent Jaguar Shark. Various complications on the way include
kidnappings, pirates and bankruptcy make this a wild comedy adventure.
To achieve his vision Wes called on well-known Visual Effects DoP Eric
Swenson (Constantine, X-Men II, Blade) to create a feast for the senses.
 |
Director Wes's approach to any shot is to try as much as possible to see
it happen in front of the camera, so using motion control, the
underwater submarine was shot in a fantastical underwater world that
Steve travels in his yellow submarine. 'Motion Control Cameras' used the
two large Milo motion control rigs, their own and a loaner from Lumiq
Studios - one for the camera and one as a model mover carrying the
30inch sub model on the head. The camera rig required the use of their Wotan
30ft arm in order to push across the landscape.
 |
Swenson then used multiple exposures to create what they termed "a
smashed together" in-camera composition so that Anderson could get an
idea of what the final shot would look like on set. The crew shooting
the miniature submarine spent two weeks shooting around 19 different
passes per shot, working on a huge motion-control set which was 60ft.
wide with a 3ft. long submarine miniature. Tracking out from the sub
as it dives into a gorge then tracking in as it comes to rest, motion
control operator Ben Goldschmied triggered both rigs from an event
controller. “Knowing what to expect of Lumiq's Milo was an advantage,
both rigs linked easily even running passes at different camera speeds,
some as low as 0.062 fps. I knew that the delays in both Mark Roberts'
systems would be the same, and by using a dummy camera in the sub's
Milo, that their prerolls would also be the same regardless of the
camera speed" says Ben. "And having full control of the curves in the
Flair programming software immediately gave the sub's movement a real
underwater feeling." "At one stage during the shoot, Wes came on
set (an unusual event as he was filming in the Med every day) and we
showed him a move as the sub is nudged by this huge shark. He commented
that he felt the move needed to be 20% larger for the initial impact. I
was able to affect this change in a matter of seconds and get approval
of the move before he left the stage!"
 |
Shooting the sub required MoCo passes with the sub's lights turned on
as well as off because the sub's lighting interacts with the ground it
lands on. As the sub reached the ocean floor, these lights reflected off
an underwater river made of a Mylar-type material, giving an
eye-catching look. Then multiple passes were shot to create different
types of ripples going across the river at different speeds. Then
enhancement passes to make the river more obvious. They also created a
matte for the sub itself that allowed them to isolate the miniature and
do corrections on it later. Several passes were required to get the
right look on the underwater 4ft. to 8ft large-scale miniature
volcanoes.
 |
The smoke - created in a cloud tank - would be added later, but the
crew had to capture "a volcano glow pass" on-set. They backlit the
volcanoes to give them more shape. Once these clean passes were
accomplished, they turned on smoke to create a sense of underwater
volume and lots of it. A smoke pass was needed for every one of the
passes except for the ones with the sub's lights turned on. Because
smoke adds volume to the lights but not a sense of the particulate
matter in ocean water, several passes were shot against black using
silver and gold glitter in water. Those would be used in post to track
particulate matter into the light beams coming from the sub.
Then began the month-long compositing process of weaving these
elements together by tracking the submarine using RealViz's
MatchMover software to make this world believable. Swenson stated
“Pretty much what you see on film was what was in front of the
camera. We put Milo through hoops to get what we wanted and it did a
great job. It performed well and produced everything that was
required of it with all passes repeating precisely”
|
|
|
Ulti-Head Package Pricing From
£34,900!
Do you know you how low-cost Motion Control can be?
Many people do not realise that getting a simple motion
control system need not be expensive. In fact, with pricing for an Ulti-Head package
starting at £34,900, it costs less than many remote pan and tilt heads
which have no motion contol capabilities.
This lightweight Remote / Motion-Control head features a pan/tilt arm
and carbon-Fibre adjustable tubes to accommodate a wide range of
cameras. The UltiHead is precisely machined and fitted with the highest
standards of industrial grade electronic components providing accurate
and repeatable positioning of the camera. The UltiHead is quick and easy
to set up, putting you in control – in minutes.
The Ulti-Head was recently put through its paces at Arri
Media Grip, UK, in an application known as "point-tracking". This
feature allows the user to tell the Ulti-Head where the object of
interest is and the head will then automatically keep pointed at the
object while the operator freely moves the encoded crane or Technocrane
around it. |
| |
IBC2005 Already?
You might think IBC2005 is still a long way away but it
is never too early to register. Registering early not only saves you
time but also gives FREE entry into the exhibition hall saving you 55.-
Euros.
Here's your chance to register FREE for IBC2005 and registering is easy!
Visit
http://www.ibc.org/2002/plan/pytreg.html. Simply follow the
instructions on screen and enter the passcode 2538918 when prompted.
Beat the queues and stay ahead by registering before 22 August. Your
badge will be mailed to you in advance and you’ll also receive regular
news updates from IBC.
With over 1000 exhibiting companies occupying all 11 halls of the RAI,
the IBC exhibition again promises to be the most vibrant show of the
year. Every aspect of content creation, management and delivery will be
covered on the show floor and in the world-renowned IBC Conference. To
register or to simply find out more about IBC or information on travel,
accommodation and visa applications go to:
www.ibc.org
Mark Roberts Motion Control will be located Hall 11 stand 705 9th -13th
September. See you there. |
| |
| Join the discussion group today at
http://www.mocoforum.com |
| |
|
Do you know anyone else who should be getting regularly informed
about the industry? Let us know; we would be happy to send them our
newsletters or DVD Showreel - The 2005 Motion Control Explained DVD.
If you would like to have more information about CGI, remote heads, cranes,
dollies, accessories or any other filming equipment please let us know
at
info@mrmoco.com
Mark Roberts Motion Control Ltd.
Tel: +44-1342-334700
Fax:+44-1342-334701 |

|